Choosing Architectural Materials

Choosing Architectural Materials


Architecture can’t exist on a page it must
be built and transforming our drawings and tiny cardboard models into physical reality
means choosing materials to represent abstract ideas. Now, I find this part of the design process
so interesting because I really view it as a form of storytelling. By simply varying a building’s materials
we can create something entirely different. Now, although this is part four of the course,
I’ve actually been thinking about the architectural material palette for our case study project
since the first time I visited the site. Now, I always pull together potential materials
I want to use during the early design phases because, for me, they help determine the building’s
form and they shape the narrative and experience I want the design to convey. Material decisions – for me – tend to arise
from the design concept, strengthening and supporting it and the process requires making
many choices, about form, about scale, about color and texture, about construction, water-tightness
and durability, about installation and finishing, and of course cost. Understanding the properties and uses of building
materials is as much the duty of an architect as understanding good proportions or physics. So, let’s get into the five categories architects
consider when selecting materials for our architecture. Every material will have characteristics present
in each category, but will also have a more dominant place in one or another. In this way, the categories overlap and it’s
ultimately up to the designer – the architect – to decide how to prioritize the criteria
that matter most to the design. With each one I’ll present the principle
then describe how our material selections were informed by it. The first, and most obvious are a material’s
physical characteristics. This includes its weight, porosity, density,
strength, acoustical properties, its resistance to weathering, its structural properties and
this extends to how it will be supported or fastened and how it impacts the physical performance
of a building. Then there’s the ever-important physical
appearance or aesthetics of a material: color, texture, shape, how it patinas, is it glossy,
or matte or smooth? And finally, the physical characteristics
include maintenance concerns as well; is it easy or difficult to keep a material clean
or in working order for example? Now, many architects quite naturally begin
with the physical characteristics of a material. What are the aesthetic goals of the project? For our project, I’ll start by referring
back to the concept now we’ve been designing an encampment by the sea that sits at the
edge of a forest and closely follows the topography. So, I’ve drawn from the building’s wooded
context to begin choosing the material palette. To tie the architecture to the surrounding
site and to defer to the landscape – the forest and the water – it was important to me that
the building recede as much as possible. I wanted the building to be discovered almost
like a shadow in the woods. Now, as architects we have only a few physical
elements to accomplish this: there’s the walls, which also include doors and windows,
there’s columns or exposed structure, there are roof surfaces either flat or pitched,
and then there’s horizontal surfaces – things like steps, decks and walkways. For the walls, I chose an exterior siding
of dark stained cedar shingles because dark colors tend to recede. I initially preferred an even darker Shou-Sugi
ban siding, but the cost and the hue were limiting factors for my client. So, we agreed on a dark matte green stain
selected among many different hues as a balance between the bark and foliage of the conifer
forest. Shingles are nice because they create a natural
texture and shadow to the wall surface. So, you can already hopefully see how I’ve
prioritized the appearance characteristics of the material as being more important than
the other physical concerns. Now, that’s not to say I don’t care about
porosity or density, but they’re secondary or maybe even tertiary. Wood will wet and dry quickly if I build it
in such a way that there’s a ventilated rain-screen behind it. Cedar is naturally rot resistant and factory
finishing the shingles provides a long finish warranty period so we’re also ticking the
maintenance checkbox here too. If – as we’ll get to soon – cost were
the most important I’d probably choose materials which wouldn’t require any finish. That approach, however, might not blend in
to the forest as well. Along with the siding, the walls are comprised
of windows and doors too. For these we’re using an aluminum clad window. Using metal clad windows limits maintenance
over the long term, especially here on the coast. We could’ve chosen all wood windows and
painted or stained them, but our priority here was to minimize maintenance on a particularly
expensive to maintain building system. We chose black from among their standard color
options for the frames because it adds punch to the openings, kind of like eye-liner and
glass in exterior walls is perceived as black during the day so it contributes to this receding
effect we were after. It also means that during the day the entire
wall surface will be viewed as one unit, rather than calling attention to the window and door
frames. Hardware for these is all stainless steel
so a light gray color mainly chosen for its resistance to corrosion. Trim at the roof, soffit and around the openings
was designed to be as low profile as possible and all are stained to match the shingles. All concrete was left unfinished and exposed
as we’re insulating to the interior face. Now, this is a concept called truth in material. For further reading about this idea be sure
to check out the Arts and Crafts movement of the late 19th and early 20th century as
well as the modern movement, both were exploring and developing the truth to material concept:
using a material for its inherent physical properties and exposing it for its natural
beauty rather than concealing it. Concrete has superior compressive strength
but rather poor tensile strength so a truth in material approach would use concrete in
locations of a structure subject to high compressive loads. This is why you see it used often in foundations. Steel, by contrast, is excellent in tension
making it ideal for long beams which deflect under load and tensile forces. Combining the two, we have reinforced concrete
– concrete with embedded steel rebar – which marries the best properties of both materials
into one. Now, there are certainly many more approaches
to selecting materials, but this one in particular resonates with me personally as the most honest
and forthright strategy. The site retaining walls were poured in place
concrete with a board-formed finish. Here again, we’re recalling the forest environment,
using the horizontal lines to reference the siding, to reach out into the landscape and
the wood grain is an abstract nod to the trees of the forest. I also like that the board forming reveals
the process of making – how concrete transforms from a plastic material when poured to a weather-resistant
solid mass when cured. The horizontal coursing matches the siding
and the dull gray conforms to the muted palette of the building as well as the granite outcroppings
and the gray of the nearby ocean. Let’s move on to the second category we
use for material selection: context. Now, context can mean many different things. It can be a material’s physical context
– like its exposure, will it be used inside or out? Will be exposed to water and sun, or to wind
or corrosive or hazardous materials? Context can also refer to a material’s proximity
to other materials or nearby structures that use a common architectural language or even
a historical context, clay tile or brick is a good example. It can also mean a material’s cultural context,
local building traditions or specific meanings. And then there’s also the functional context
of a material, for example it would be difficult to justify constructing a prison entirely
out of glass, right? Our project has many different contextual
meanings to draw from. I mentioned the forest which has informed
our decision to choose a dark siding, but our materials also have a variety of interior
and exterior exposures and a precise location near the salt water. Equally, our interior materials will be adjacent
and experienced in conjunction with the exterior materials. So, lots to talk about here. Context is intimately linked to the concept
of contrast and it’s one the most important things to understand with respect to choosing
materials. It’s what distinguishes one thing from another
and we use it to make sense of our world. Gray concrete feels cooler and wood feels
warmer when these materials are next to each other. Similarly, textured surfaces appear more textured
when placed near smooth surfaces. We can use this in our architecture to emphasize
our ideas. Hard, soft, warm, cool, light, dark. Heavy, slight. Here we’re using both context and contrast
to great effect when we move to the interior material selections. The rough bark of the exterior siding gives
way to a smoother, warmer toned interior. For the floors in the main living spaces I
selected a local red birch in a five-inch wide plank. This sets a warm plinth which grounds the
space. If the exterior is the bark of the tree, the
interior contrasts that by acting like the heartwood, warm and welcoming. At night, the dark shadow of the building
virtually disappears into the forest and the warm wood is like a lantern or a tent in the
forest lit up like a beacon. The entry areas and connectors will receive
a gray porcelain tile – a highly durable stone alternative and a result of its functional
context hosting soiled foot traffic. We had hoped to use natural stone or poured
concrete, but the tones of the local stone and concrete mix didn’t align with our client’s
taste. So, this was a compromise. We opted for the porcelain for its low relative
cost, its durability and its low environmental impact as its made primarily from recycled
material. The cleft finish is another play in contrast
against the nearby satin of the oiled wood floor. To help the view to take prominence inside,
we’re painting the window frames black rather than matching the adjacent wall surface. The idea is again to downplay the window frames,
to dissolve them. Walls and ceilings are primarily painted gypsum
wallboard and this too was done to downplay their presence. Inside, we wanted the spaces to be about the
warm floors and the views to the site. Alright the next category is a material’s
experiential qualities. Materials may seem hard or soft based on our
perception. For example metals are often perceived as
hard even when their physical properties might suggest otherwise. Aluminum is a soft metal, but it’s often
perceived as hard. This is because of personal bias or associations
with certain materials. Now, these emotional connections shouldn’t
be underestimated. I once had a client who disliked my suggestion
for a metal roof as she had grown up living beneath a metal roof and associated that with
a difficult time in her life – a time she’d rather forget. In part, the experiential qualities informed
our roof material choice. Standing seam metal has this crisp, taut look
that reminds me of a Maine woods camp. So here we’re relying on what the material
connotes or signifies. But the roof is a great example of a choice
where many factors influenced our decision. I wanted to maintain the monochromatic exterior
color palette and so I chose a zinc-colored painted aluminum to coordinate with the wall
color. We could’ve selected zinc or a lead-coated
copper – truth in material – but both were cost prohibitive and the rainwater run-off
from zinc reacts with cedar in unpredictable ways. Metal balances a streamlined installation
cost – because big panels go up quickly, and a low life-cycle maintenance cost. Another consideration here on the coast, we
have to be really careful about which metals we use in the corrosive salt air. For the roof, I chose PAC-Clad’s painted
aluminum metal roofing system which carries a 30-year coastal warranty. Now, all these factors play into the final
decision, but one is always more dominant than another. Certainly, the experiential qualities of materials
and a building’s interior design are codependent. The money we saved by using gypsum wallboard
everywhere, we allocated to purchasing machined structural tie rods and clevises. These are all exposed and fabricated from
stainless steel and they clearly express the tensile forces of the structure in the main
living space. Where the outer walls want to spread apart
under the roof load, and the tie rods hold them together in tension allowing us to vault
the ceiling and increase the volume of the main living space. Importantly, these rods convey both camping
and nautical experiential cues – cordage and rigging. Now, we’ll get into the design of the kitchen
and the baths in a future video, but briefly in the bathing spaces, the floors and shower
walls all receive the same dark gray tile we’re using at the entry and connectors
we’re mixing up the texture of the floor with a pebble tile at the bathtub and shower
rooms. The pebbles help with grip under foot and
they reference beach stones. The fixtures in the baths are gloss white
and polished chrome which contrast the rough textured floors and then we finish out the
bathing spaces with etched glass shower wall dividers which will act as sort of these bright
luminous planes in what are relatively dark bathing spaces. Moving on, we come to costs. And here we include, not only the material
costs, but acquisition costs, maintenance, shipping, and installation costs. Often new cutting edge materials will increase
labor costs due to unfamiliar installation processes. All materials have a cost and if you have
a lot of area dedicated to one material like our shingled walls for example you have to
be careful not to specify an expensive material to keep within the project budget. Or at least be cognizant of it. Shingles have been used on the coast of Maine
for a long time because they’re durable, rot resistant readily available and fairly
inexpensive. Selecting local materials is always my preference
when possible because it’s a more environmentally friendly choice. It also maximizes the local labor force’s
experience installing them. Even though the material is economical, labor
can add up quickly as they’re installed one at a time. The shingle coursing I initially specified
was four inches – meaning every three courses would equal one vertical foot, which aligned
nicely with the window and door openings. To me, this presented more of a textured face
but it also required twenty percent more shingles per square foot of wall area and that quickly
became a cost concern. This additional cost of material and labor
was significant and so we compromised to a more standard five-inch coursing. Now, this is common practice in design, we
propose ideas and then test them against a host of factors. We revise and revisit as we receive additional
information, in this case cost information. Was a twenty percent increase in the cost
of the siding justified? Was the added effect worth it? In the end, our answer was no, but perhaps
for a much smaller structure it may have been yes. Cost implications and material selections
are one of the easiest things to weigh during the design process. It’s one reason they’re the target for
cost-savings efforts along the way. But, typically, the biggest driver of cost
is the overall square footage of the project, not material cost. Even so, we’re careful here to limit the
more luxurious materials – like soapstone – to limited areas. And these are areas that we’ll be interacting
with on a daily basis, like the kitchen counters. And the fifth consideration here is related
to manufacturing. Here we’re talking about installation, acquisition,
assembly or finishing. Now, this may also apply to environmental
impacts too things like how resource intensive it is to manufacture, to mine, or procure. Life spans of materials fit in this category
too. The decking choice is a good example of something
we struggled with with respect to sourcing and environmental impact. Now, I love using the local cedar here for
decks, it’s really soft under foot and it weathers to a nice, light silvery gray which
would also mimic the horizontal plane of the nearby water nicely, but its softness is a
real liability, it affects durability. It’s significantly less expensive than a
tropical hardwood like Ipe, but doing a quick life-cycle cost analysis, we discovered we’d
have to replace it more often than a harder, longer lasting material like Ipe. The Ipe is more expensive to acquire and install,
but it will last much longer and has the same visual appearance characteristics as the cedar,
weathering to a nice silvery grey. In the end it was cheaper. We sourced ours from a managed forest to diminish
the environmental impact of it as well. So, in this case the long-term durability
trumped everything else. So, those are five general considerations
which will inform your material selection for your architecture. Remember, each of these material considerations
can be thought of democratically; that is, none is necessarily more or less important
than another. Your design should begin to suggest what materials
best represent your ideas. And it can be precious few. You want to study the work of architects like
Tadao Ando, Louis Kahn, Peter Zumthor, LeCorbusier and Aalto – and witness the depth of knowledge
and skill they deployed using a relatively limited set of building materials: wood, concrete,
glass, and brick. You can say quite a lot using a very spare
palette of materials. Now, the take-away is that the material selections
were a result of intentionally considering all aspects of the experience we wanted to
create for our client as well as the necessity of building something durable and meaningful
here in an extreme coastal environment. It has to look good and tell the right story. It has to comfort and shelter, reduce and
minimize our impact on the site and recreate – in an abstract way – the quiet of the forest
in the new place we’ve created. It’s a tall order, but by following a process
which prioritizes the most important characteristics for each part of the architecture you can
find a methodology for choosing wisely. Material selection requires you to be an observer
and student of the built world. Study buildings you admire and note how the
material qualities effect how you feel there. Now, if I’ve helped you at all with this
video I’d so appreciate a thumbs up below, it helps me to grow the channel and to know
I’m making the kinds of videos you’re interested in watching. Be sure to hit the notification bell to be
notified whenever I upload a new video. Cheers!

88 Comments

  • 30X40 Design Workshop says:

    Resource page can be found here: https://thirtybyforty.com/choosing-architectural-materials
    Cheers…

  • Mardochee Ogu says:

    first

  • Jamshed Vatanov says:

    very useful one

  • mainman jesse says:

    I love that wood and concrete joinery at 18:12, very interesting

  • Daniel Aguirre says:

    hi.material selection, its a very interesting topic, as a student this semester in my architecture design class, we are learning to develop  a  building that firstly answers to the rural community  that we are working for out side of the city, and at the same time working with local materials, in special with guadua (a kind of bambú) as the estructure of most of the buildings, and other complementary materials for the guadua and the sites we are analysing, giving a response to the different necessities of the community, but we haven´t ended that study process, this video has contributed to this process.thanks.

  • Glenview ngaluafe says:

    CHEERS!

  • Ryan Calleja says:

    I learn your lessons today, apply them tomorrow! Eagerly waiting for the next video! 🙂

  • Calvin Rogers says:

    *Sits down
    *Puts on glasses
    *Takes notes

    Thanks again, Eric.

  • aditi Pawar says:

    Your videos quite inspire me to do work…and teaches a lot..
    Please do share some retaining wall designs+ materials for a sloping site..and how does retaining wall helps in design!.

  • Atelieri Design says:

    I find the tutorials beautifully presented and even though I am not in architecture, the valuable principles you state are easily applicable to other design spheres.

  • Qendrim Begisholli says:

    realy appreciate the time and effort being put in the videos, very good quality , please never feel pressured to rush any of these videos just keep doing what your doing. Keep up the great work :D.

  • John Boccuzzi says:

    Great video Eric.

  • softminimal1 says:

    That house site is amazing.

  • boris_enye says:

    Great video! May I know the magazine/book reference you showed at 4:55, about door/window detail connections? Thank you.

  • Jake Kroft says:

    That was a great video! Love your channel!

  • Jeff Rice says:

    Hey Eric great job! I was wondering if you keep a library/ inventory on hand?

  • jared day says:

    I honesty love your videos they are really helpful though I'm a senior in high school these will be really helpful next year when I go to architecture school.

  • Roger Hines Garden Design says:

    Great video once again, although I'm not an architect but a Landscape and garden designer I find your approach to the ways in which you do things inspiring and have adopted many of them in my business.
    Thank you for your time and effort.

  • Roger Hines Garden Design says:

    Great video once again, although I'm not an architect but a Landscape and garden designer I find your approach to the ways in which you do things inspiring and have adopted many of them in my business.
    Thank you for your time and effort.

  • Andreea Pescar says:

    As a beginner in the field, I find your videos​ very useful. The sample materials you have at hand – what a good idea!

  • Kiran Basukala says:

    I like your approach, concept, process….since I am also practicing architect. It really inspire me for the clear vision about my approach……

  • SCervanters says:

    +30X40 Design Workshop Another stellar entry in the canon of contemporary thoughts in architecture. We are truly grateful

  • IamCceeLL says:

    If you're my architecture prof. I wont be bored! Great video man.

  • Federico Sastre Heer says:

    Perfect as always! Keep the good work!

  • Dawn Melanson says:

    Another great video Eric! Your drone shots gave a great visual to the building site and the surrounding area, which nicely tied in with the materials, and everything you were discussing!

  • Semir Watts says:

    LOL. At times your delicate poetic wording describing the architecture sounds like some kind of parody from Southpark. Can't stop laughing. But nice property and nice video describing it. Thank you.

  • Semir Watts says:

    Subscribing.

  • Gary Thorley says:

    Excellent Presentation … Thank You !!

  • JustSketchIt says:

    May I ask, What university did you go to?

  • Jake Lockyer says:

    I study Automotive design, and even though nothing to do with this video I always find these inspiring. Interesting to see how other design fields work. I've walked away from this video thinking a lot more about why car designers don't make better use of exterior materials. Like architecture, showing the beauty of the material for what it is. These videos are a great insight into architecture.

  • Jose C says:

    This is a great video, wow

  • Tutya Thiyam says:

    Eric, you should be a professor for design (if you are not already one).
    Learning a lot from your videos.

  • abbasdwd 93 says:

    Holy shit I'm in my final semester of master of architecture and watching this video made me realise I take materials for granted. Very informative and eye opening! Thanks for the video

  • Bro Bigo says:

    You are my best teacher ever and i want to know more about your document progress.

  • seifallah bg says:

    architecture is all about details !

  • Stoica Alin says:

    Your lectures are quite a pleasure to experience. It is to say that your work is not only pure in its conception, but also pragmatic by its conformation. I honestly enjoy watching this series. The most ecstatic things for me are watching the process behind the product. Truly inspiring but yet humble how you nurture the project with caring thoughts and extensive research and work.
    Can't wait for the next one!
    Sincerely,
    Stud. Arh. Alin T. S.

  • Houses Built Tiny says:

    Mr Rienholdt, I'm am avid fan of your appreciation for feel, simplicity, functionality, history and integrity to residential building desogn. As for myself, I'm just an uneducated hack. But, I would be honored if you would critique my design and execution of my first two tiny houses.

  • Roberto O says:

    Loving to get to know all the beauty of nature and architecture of your area this summer. Thank you for the video!

  • Shubs Sharma says:

    I have been following your channel for quite some time now Sir. And honestly your videos are teaching me alot more than I learnt at my Architecture school. Can't thank you enough for these videos. You are so inspiring.

  • Archibald Molutsoane says:

    Defenately thumbs up

  • Anthony Graham says:

    This video was great! Thanks for all your hard work on these videos! I always learn so much from watching these.

  • Rohit B says:

    great informative video mate..thanks for sharing! 🙂

  • Pilette alain says:

    great vid! I'm starting to pass them around to my interns ^^. initially I was keeping them to myself to enjoy with a glass of whisky on the long nights working on projects. But not any more! mandatory watching for interns! and they really like it 😀

  • Rogelio Rodriguez says:

    Love your videos!! Congrats

  • Rajon Munroe says:

    I really appreciate your whole content!

  • Carl Gibson says:

    Eric, where do you get those beautiful metal sample discs?

  • Venisse Ann says:

    I just found your channel and oh my gosh your videos are top notch! I just started architecture school and your videos are really helpful. I would definitely recommend you to my classmates and please don't ever stop making good videos! You are a freaking godsend!

  • Marsha Creary says:

    In certain regions I've noticed that there are materials specific to the area or region. In Southern Florida I've noticed that red brick isn't typical for building a home but atypically, I've seen it used in a neighborhood in South Miami that I lived in. Can you tell me why or when they would be used for building materials or pavers?

  • j t says:

    how do you know which material to choose that will tie in with your budget constraints? Do you have a cost sheet that gives cost per m2?

  • Florin Bobiș says:

    You're like…the Peter Mckinnon of architecture or…the Will Patterson of architectural design

  • Darren Elmes says:

    Absolutely valuable work you are doing here ….to improve all Architects professional knowledge…a huge THANK YOU.
    Please dont stop …very valuable.

  • Raymond Sawe says:

    You point out new info I wouldn't have even dreamed of and that's pretty much every time … Always looking forward to your posts..

  • Arivaldo De Oliveira says:

    Legend. Thank you very much, Eric.

  • Nicola Holmes says:

    Just finishing concept design stage on a barn style home and now working on material selection.  Found the described process for selecting materials really insightful and helpful.  Thank you.

  • Anupam Hore says:

    undoubtedly the best online tutorial videos for architects and the students of architecture…lov your videos

  • Kawaii Animations says:

    Do you work in a team/firm or are you an independent?

  • amarlene94 says:

    Your videos are extremely helpful and is inspiring my work format in various ways. I hope to see more from you. Top notch 🙂

  • Zorn Gottes says:

    I love my profession and hate most clients. I can not consume enough drugs to stand their stupidity. Sorry for that. A few are good and they get what ever I can give.

  • Gabriel Mares says:

    another incredible video.. your videos show me so much and show me just how much more i need to learn, i love it, great work keep it up 👍🏻

  • HIGHLANDER says:

    Thank you so much for taking time to making these videos! 😊🏡

  • Wayward Woodworker says:

    Great considerations. I love the comparison with the dark exterior w/ wood interior to the bark of the tree and the heart wood within. I really enjoyed this little series and the very precise way you've chosen, distilled and disseminated the information. Thanks as always for your work. Cheers, Rob

  • Jourendy Bazoer says:

    You inspire us to kepp doing what we do . Many tnx

  • Ethanian Dragoneel says:

    Wow, thank you so much! My teachers were just teaching me about this, but seeing the video with the actual materials and house really helped me understand it properly. Thanks a ton!!

  • Itauã Pedro Conceição says:

    One of the best classes I've had outside of college. Thanks for sharing this knowledge, I feel that the impact of your work will be very important to get where I want as an Architect.
    Certainly entered the list of references to study constantly. Thank you.

  • rida baron says:

    thank u for every things

  • STUDIO K says:

    Great inspiration for many architects.

  • Schraubtischtäter says:

    I can't say more than THANK YOU for these great videos! I learned so much within hours that woud have taken me years without you. Thanks again!

  • Nitya Gonnakuti says:

    What tropical hardwood did you suggest/use?

  • Jeremy Westburg says:

    Great video! Thank you.

  • Dakkogi Raoru says:

    Very nice. Have you ever worked on a building meant to contrast with its surrounding wilderness?

  • Gurpreet Bal says:

    Nice

  • Caroline Tamarez says:

    This was such a great video! So much useful information. I am not in the architecture field but I like to learn about building practices. Thank you for the time & effort you put into your videos.

  • AbuDhabiBlogger says:

    Your honesty while talking about your projects helps so much. I'm an architecture student and your workshop has helped me design my thesis in more ways than you can imagine … thank you!!

  • archishme says:

    Today i finish watching all of ur videos….. This was the last one.. Inspired…

  • Abdulwahab Alalyani says:

    I really love it, knowledge with experience is the only way to improve the architecture.

  • TheRadar says:

    i learn more from you than my professors

  • Holistik Architecture says:

    Do you have good principles to separate 2 materials without looking like 2 different blocks? how to make it blend into 1 building even with 2 different material?

  • Life of a Bachelor says:

    this all seems as if the "designer" or is choosing the materials. is it a normal part for clients "homeowners" to specify certain products and colors etc

  • Joseph Wise says:

    Really impressed by how much effort and skill is involved in good architecture

  • Agata Cabrera says:

    Wow, this was very informative. Just the kind of video I was looking for! You've got a new sub, man!

  • Phil says:

    Yes thank you for a future architect like myself these videos are really helpful.

  • Vannjon Lloyd Soria says:

    I'm an Architecture student and I really appreciate your videos, you definitely deserve to be an example in teaching really, I learned so much! Cheers!

  • creative_jules says:

    Where do you buy your material palette?

  • Paula Rodrigues de S. Paula says:

    Are you a virgo, in the zodiac? Your creative methods are SO organized! Lists, categories, even the aesthetic of your work screams virgo to me. But i also think that u could be lion…

  • Jamie T says:

    I really enjoy your vlog, I am a 10 Yr Architectural Designer and want to up my game. I know I'm a really good designer, but feel I could do so much more. Thank you for inspiring me.

  • Erdem - MP says:

    Hey Eric, could you share the name of that beautiful location at 03:03 please? Thank you!

  • Rishi Rajan says:

    Hello eric. I want to ask you something. Is it possible to give me a email id where i can send my query in detail?

Leave a Reply

Your email address will not be published. Required fields are marked *